Follow

How to Downgrade 3.2 Firmware for a 3.1 Installation

Unlike the 3.0 to 3.1 or 3.2 upgrade process, the downgrade procedure from 3.2 to 3.1 firmware is a simple procedure. Sign the hardware into the 3.1 software installation and push the 3.1 firmware to the portal gateway or controller as you normally would when upgrading hardware. Bootloader firmware is NOT required.

Supported 3.1 firmware:

  • Portal Gateway 3.01.103
  • WDC Controller: 3.01.006
  • WAC Controller: 3.01.007
  • Omnilock Controller: 3.01.006

 

Please note that 3.0 firmware downgrades are not supported.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.