Follow

STANLEY Commercial Hardware Mortise Cylinder Configurations for BEST 45 H and 45HW

These parts apply to 1-3/4" thick doors only. For door thicknesses other than 1-3/4", please email technical support at technical support.

Single Keyed Functions 

Single_Keyed_Functions.jpg Single_Keyed_with_J_and_M_Trim.jpg
Single Keyed w/ Sectional Trim Single Keyed w/ Escutcheon Trim (J & M Trim)
6EQM6-Keyway-COM Code-Finish-CAM-118 6EQM6-Keyway-Com Code-Finish-Cam-138
7187763S (ILCO #19 CAM) 7187763S (ILCO #19 CAM)
8Q01016+Finish (Collar, Spacer, Wavy Washer)  

Single Keyed Function Additional Notes

  • The standard 1-1/8” cylinder length will work with sectional trim.
  • The cylinder cam selection will be irrelevant as the end user will be required to replace it with the ILCO #19 cam shown above.
  • The STCH collar assembly will require the use of both spacer and wavy washer (both included in kit).

Single Keyed Function Escutcheon Notes

  • Escutcheon trim will require a longer cylinder. The 1-3/8” cylinder length is going to be equal to a BEST 1E74 cylinder.
  • A collar will not be required for this application. They can use a wavy washer (B34115) if desired. The wavy washer can help with spacing when using J trim.
  • The cylinder cam selection will be irrelevant as the end user will be required to replace it with the ILCO #19 cam shown above.

Double Keyed Functions  

DoubleKeyedFunctions.jpg Single_Keyed_with_J_and_M_Trim.jpg
Double Keyed w/ Sectional Trim Double Keyed w/Escutcheon Trim

6EQM6-Keyway-Comb Code-Finish-Cam-118 x2

6EQM6-Keyway-Comb Code-Finish-Cam-138 x2

7187763S (ILCO #19 Cam) x2

7187763S (ILCO #19 Cam) x2

8Q01016 + Finish

(collar, spacer & wavy washer) x2

 

8Q01089 + finish (spacer) x2

 

 

B34115 Wavy Washer (optional)

Double Keyed Function Additional Notes

  • The standard 1-1/8” cylinder length will work with double keyed functions with sectional trim.
  • The cylinder cam selection will be irrelevant as the end user will be required to replace it with the ILCO #19 cam shown above.
  • The collar assembly will require the use of both spacer and wavy washer (both included in kit).
  • Double keyed functions will require an additional 3/16” thick spacer for each cylinder as shown above.

Double Keyed Function Escutcheon Notes

  • Escutcheon trim will require a longer cylinder. The 1-3/8” cylinder length is going to be equal to a BEST 1E74 cylinder.
  • A collar will not be required for this application. They can use a wavy washer (B34115) if desired. The wavy washer can help with spacing when using J trim.
  • The cylinder cam selection will be irrelevant as the end user will be required to replace it with the ILCO #19 cam shown above.

 

    Holdback Function        

Holdback_with_Sectional_Trim.jpg Holdback_with_j_and_m_trim.jpg
Holdback w/ Sectional Trim Holdback w/Escutcheon Trim (J & M TRIM)
6EQM6-Keyway-Comb Code-Finish-E-118 x2

6EQM6-Keyway-Comb Code-Finish-E-138 x2

7187763S (ILCO #19 Cam)

7187763S (ILCO #19 Cam)

8Q01016 + Finish (collar, spacer & wavy washer) x2

 

8Q01089 + finish (spacer) x2

 

 

B34115 Wavy Washer (optional)

Holdback Function with Sectional Trim Additional Notes

  • The standard 1-1/8” cylinder length will work with double keyed functions with sectional trim.
  • This function will require both cylinders to be ordered with the E straight cam option. Each lock will require one cylinder with the ILCO #19 and one with the E straight cam.
  • The E straight cam will be used on the outside cylinder.
  • The straight cam is replacing the unique C293 as we do not have a C293 alternate for the STCH cylinder at this time.
  • The STCH collar assembly will require the use of both spacer and wavy washer (both included in kit).
  • Double keyed functions will require an additional 3/16” thick spacer as shown above.

Holdback Function with Escutcheon Trim Additional Notes

 

  • Escutcheon trim will require a longer cylinder. The 1-3/8” cylinder length is going to be equal to a BEST 1E74 cylinder.
  • This function will require both cylinders to be ordered with the E straight cam option. Each lock will require one cylinder with the ILCO #19 and one with the E straight cam.
  • The E straight cam will be used on the outside cylinder.
  • The straight cam is replacing the unique C293 as we do not have a C293 alternate for the STCH cylinder at this time.
  • A collar will not be required for this application. A wavy washer (B34115) can be used if desired. The wavy washer will help with cylinder spacing when J trim is used.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.