QMS & QME 100 FAQ's

Please see below for the frequently asked questions about the QMS/QME Mortise Locks. If you would like a PDF copy of this file, please click here. For specification information or more information on the QMS/QME products, please see the catalog.

Q: What is the STANLEY Commercial Hardware QMS/QME100?

A: The QMS/QME100 is a grade 1 mortise lever set. The QMS100 has a sectional trim whereas the QME100 is equipped with an escutcheon trim. There is no other difference between the two locks. Aesthetics is the major reason for choosing one trim over the other. The QMS/QME100 comes standard with a lost motion chassis that provides resistance to internal damage caused by physical force to the lever. Its thru-bolt design and heavy –duty spring tension provides longer performance life and prevents lever droop.

Q: Who is the QMS/QME100 customer?

A: The QMS/QME100 is a cost-effective option for non-institutional applications such as hospitality, multifamily and commercial office spaces.

Q: How hard is it to install the QMS/QME100?

A: The QMS/QME100 is simple to install and can be done in a few minutes or less once the door is prepped. The QMS/QME100 fits the standard mortise door prep (86). Its few parts and compartmentalized packaging allows for quick and easy installation.

Q: What unique feature is found on the QMS/QME100 that makes it less susceptible to break-ins?

A: The QMS/QME100 is equipped with a breakaway outside spindle that is designed to twist off during abuse before any internal damage to the lock occurs. The lock owner would then just need to replace the inexpensive spindle as opposed to the entire lock.

Q: What functions are offered for the QMS/QME100?

A: The QMS/QME100 is available in 15 functions (i.e., single dummy, full dummy, passage, privacy, privacy w/deadbolt, entry, exit, corridor, dormitory, classroom, classroom security, apartment, storeroom, institutional and store door). When viable, the QMS/QME100 is equipped with an ADA-compliant thumbturn.

Q: What door thickness range can the QMS/QME100 accommodate?

A: The QME100 comes standard to fit doors 1 ¾” – 2 ¼” thick. The QMS100 comes standard to fit doors 1 ¾” – 2” thick. However, the QMS100 can be ordered with an optional screw pack to accommodate doors up to 2 ¼” thick.

Q: What lever styles are offered for the QMS/QME100?

A: The QMS/QME100 has 3 lever styles (i.e., Sierra, Summit & Slate).

Q: Do you have to specify handing when ordering a QMS/QME100?

A: The QMS/QME100 is shipped non-handed, so the handing must be adjusted in the field to fit the specific application.

Q: Does the QMS/QME100 come with a core?

A: The QMS/QME100 can be ordered with a Small Format Interchangeable Core (SFIC) or as Less Cylinder.

Q: What keyways are available to order on the QMS/QME100?

A: The QMS/QME100 is available to order with the following keyways: BEST “F” SFIC, Kwikset “KW”, Weiser “E”, Schlage “C”, Yale “GA” and Sargent “LA”.

Q: What finishes are offered for the QMS/QME100?

A: The QMS/QME100 is available in 6 finishes: 605, 606, 613, 619, 625 & 626.

Q: What is the lead time for a QMS/QME100?

A: The average lead time for a QMS/QME100 is less than 2 weeks.

Q: What warranty does the QMS/QME100 have?

A: The QMS/QME100 has a limited lifetime mechanical warranty and a 3 year finish warranty. The 613 finish is not covered under the 3 year finish warranty.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.