5 Knuckle CB Full Mortise Hinges - Standard Weight
Templates are arranged in order by size, smallest to largest. Click on the blue link of the template you wish to download or view. For cut sheet information on the 5 Knuckle Full Mortise Hinges, click here to visit the website.
For additional information and FAQ's on the CB concealed bearing hinges, please click here.
Maintenance of CB 5 knuckle concealed bearing line of hinges
As required apply Shell Darina # 2, or equivalent grease at the non load bearing center hinge knuckle and pin*. Bearings do not have to be lubricated as they contain polytetrafluoroetheline.
Hinge surface should be kept clean. Use a soft damp cloth free of any chemicals that would harm the protective lacquer coating.
* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.
CB179 – (ANSI A8112) Steel – polished and plated or phosphated and prime coated for painting
CB191 – (ANSI A2112) Brass or bronze – polished and plated or painted
CB191 (32) – (ANSI A5112) Stainless steel – highly polished
CB191 (32D) – (ANSI A5112) Stainless steel – satin finish
5 Knuckle CB Full Mortise Hinges - Heavy Weight
CB168 – (ANSI A8111) Steel – polished and plated or phosphated and prime coated for painting
CB199 – (ANSI A2111) Brass or bronze – polished and plated or painted
CB199 (32) – (ANSI A5111) Stainless steel – highly polished
CB199 (32D) – (ANSI A5111) Stainless steel – satin finish
* Only available in steel.