Intelli-M Version Information

  • The current release of the EL Controller Firmware 1.08
  • The current release of the Wireless Gateway Firmware is 1.08

Intelli-M System Requirements

Operating Systems

  • Windows Vista Professional, Enterprise, Ultimate
  • Windows 7 Professional, Enterprise, Ultimate
  • Windows 8
  • Windows Server 2008
  • Windows Server 2008 R2 (Preferred)
  • Windows Server 2012
    * Home or starter versions of Windows are NOT supported as they do not contain the required components.


  • Intelli-M uses SQL Server 2008 and newer and will automatically install the 32 bit version of SQL Server 2008 R2 with Advanced Services if a compatible version of SQL Server is not already installed. Intelli-M alsorequires Microsoft SQL Reporting Services, a part of the SQL Server installataion, to be installed as well.
  • All required software packages, including SQL Server 2008, will be automatically configured during the installation process. Refer to the installation chapter for more information


Misc. Software Components

  • Internet Information Server (IIS)
  • Message Queuing

Hardware for 32 Doors or less

A basic workstation class computer is sufficient.

  • 2 GB RAM
  • 2 GHz Processor
  • Dual Core 2GHz Processor
  • 100 GB Hard Disk Space
  • Single 100 Mb Network Interface

Hardware for 32-128 Doors

  • 4 GB RAM
  • Intel i5 or higher Processor
  • Dual Core Processor
  • 100 GB Hard Disk Space
  • Single or Dual 100 Mb network Interface

Hardware for > 128 Doors

  • 4GB RaM
  • Intel i5 or higher Processor
  • Dual Core Processor
  • 100 GB Hard Disk Space
  • Single or Dual 100 Mb network Interface

TCP/IP Port Exceptions

  • 80
  • 443
  • 18776
  • 18777
  • 18779
  • 1433

Network and Power Requirements

  • 110 VAC and Ethernet Connection at all Portal Gateway locations.
  • Each Portal Gateway requires 1 static IP


Gateway Requirements

  • PoE (IEEE 802.3 af) or 24V DV/1A
  • Ethernet TCP/IP (IEEE 802.3)

Electronic Lock Requirements

  • Stanley Wireless Gateway
  • 4 AA BAtteries

QIC Controller Power Requirements

  • 1CAt 5/Cat 6 Cable
  • PoE - Direct power from PoE switch external power supply (24 VDC 1, A)

Additional Notes about QIC:

  • The maximum total of all output power from the eIDis 750 mA
  • The maximum output to either reader is 250 mA.
  • The maximum output from the combined open colleess: 450 mA or 750 mA less the sum of the readers.

Intelli-M Downloads

Click on the name of the download you wish to view.

Intelli-M User Guide
Intelli-M Software Link on Commercial Hardware Website
Intelli-M Stanley EL Animated Training Software Demonstration


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.