Why wont my lock program? ("Please swipe a card..." never goes away)
The reader could be dirty or bad or the cable that plugs into the bottom of the lock could be bad.
Take the PDA/Netbook and the programming cables to another lock and try to program it. If it works then the cable is good if it doesn't take programming, you need to replace the cable.
If it does work: go back to the lock that wont program, take it off the door and when B.A.S.I.S Transport prompts “Please Swipe a card…” press the override button on the circuit board, this will take place of swiping a card. If data transfers then try to use your card to gain access. If it still does not work, try cleaning the magnetic swipe on the reader with alcohol cleaning cards. If this doesn't fix the problem then you may need a new reader.
BASIS G and BASIS V
- The programming cable part number is "BASDCAB" - The part number for the alcohol cleaning cards is "VPDCLN"
Below is a list of part numbers for replacement reader bezels.
71833445S - BASIS MAGSTRIPE READER FRK TRACK TWO
71837900S - BASIS MAGSTRIPE READER FRK TRACK THREE
Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.