Emergency Rescue Hardware Templates & Instructions

Emergency Rescue Hardware 

Click on the description to open the template you wish to view.

Double Acting Pivot Template and Instructions

For more information on the Double Acting Pivot, click here.

DAP–3 – (ANSI A2742) – Brass and mallable iron – standard finishes
Hinge Size Description
DAP-3 N/A T90-31 Pivot Set for Double Acting Doors DAP-3

Installation Instruction for the DAP-3

DAP-3 DAP-3 Installation Instructions


Emergency Stop with option Holdback

For more information on the emergency stop with or without the holdback option, click here.

ES–1 – (ANSI A1882) – Extruded and cast brass – standard finishes


Hardware Size Description
ES-1 N/A T90-02 Emergency Door Stop ES-1


Double Lipped Strikes

For more information on the double lipped strikes, click here.

DLS–1 – For 1/8" (3.2 mm) Inset hung doors – Brass – standard finishes

– For center hung doors – Brass – standard finishes
Hardware Size Description
DLS-1 N/A T90-35 Double Lipped Strike (DLS-1)
DLS-1 For BEST Mortise N.A B200231-S__DLS-1BML
DLS-2 N/A T90-36 Double Lipped Strike (DLS-2)
DLS-2 For BEST Mortise N/A B200232-S__DLS-2BML
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.