Why are the motor wires different on the old and new cylindrical chassis?


In 2008 our cylindrical 9K motor design changed. If you have a new electronics board you also need to use the new cylindrical chassis; if using an old electronics board you have to also use the old cylindrical chassis. If new and old product are mixed this could cause premature failures on the chassis. The connectors have been changed on the harnesses and cylindrical chassis to make sure old and new product cannot be hooked together. This only affects cylindrical locks.

Applies To

9KBV and 9KG (BASIS Offline Cylindrical) or 9KZ (Cylindrical Keypad EZ)

Additional Information

Old motor design pre-Jul 18th 2008 design change

Motor Design July 18th 2008 - October 5th 2011

Motor Design October 5th 2011 to present

Note:  The only change form the July 18th version to the October 5th version is a color change of the housing from silver to black.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.