Cardholder information takes forever to get to the portal gateway after a bulk modify.


Bulk Cardholder Modifies sends the information to the controllers as single Add/Deletes. This delays the information from getting to the controller as well as backs up the system. Using Bulk modifications are not advantageous for Wi-Q Interface 3.0 installations. 

The preferred method to perform a bulk modify of cardholders: Stop Com server. In System Administration, perform bulk modifications, clear the FailedRPC table, restart the COM to trigger downloads to the panel. 

Applies To

BASIS Wi-Q Interface 3.0

Additional Information 


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.