SHELTER Portal Gateway Firmware Update

You are trying to register a SHELTER Gateway for the first time and the Public Internet Routing reads "Not Connected" or you are unable to enroll it to your location while seeing conductor connected.



When trying to register the device, you see the following. 


You must upgrade the portal firmware on the firmware tab prior to enrolling portal's for the first time into your location. 


1. Navigate to the portal gateway via the default IP address. 

2. Click on the Advanced Drop Down to Expand additional functions. 



3. Once the advanced section is expanded, locate and click on the "Check for Updates" button.


4. The portal gateway will take a firmware download and then reboot. Do not disconnect the device or power the device down during this process.

5. Once the device is back up and running, you will see a packages update to the versions listed below and be able to register it into your location. 

  • Gateway UI  - 1.6.11
  • UI Service - 1.6.8
  • Symphony - 1.3.3
  • G.M.A - 1.4.3
  • L.R.R.E - 1.0.9
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Limited Warranty on Information: The documents contained on this website are distributed as is, without warranty of any kind, either express or implied, including but not limited to implied warranties for the document’s quality, performance, merchantability, or fitness for any particular purpose. Neither BEST Access Solutions, Inc., nor its dealers or distributors shall be liable to the user or any other person or entity with respect to any liability, loss, nor damage caused or alleged to be caused directly or indirectly by this information.